Guides

No sound in your screen recording? What to check

A recording with no sound, or with only half the sound, nearly always comes down to one of a few settings. This guide helps you work out which sound is missing, check the right place in Cheap Recorder, and make sure your next recording is right before it matters.

Before you start

  • Cheap Recorder open in Google Chrome and signed in.
  • Five minutes and a short test recording. It is much quicker to find a sound problem in a thirty-second test than in an hour-long recording.

First, which sound is missing?

Cheap Recorder records sound from up to three places, and each has its own setting:

  • Your voice comes from the microphones ticked in the Microphone tile.
  • The other people on a call come from the Call audio tile, through a shared Chrome tab.
  • Sound from what you are filming, such as a video playing in a tab, comes with the screen pick, but only when Chrome shares that sound.

Play your recording back in the player on the page and note which of these you can hear. Then go to the matching check below.

The checks, in order

  1. Read the Microphone tile. Its small line of text tells you the state. "allow the microphone to record your voice" means Chrome has not been given access: press Allow microphone and camera. If you blocked it earlier, allow the microphone again in Chrome's site settings for this page, then reload. "no microphone found" means Chrome cannot see one: plug it in and press Rescan. "none selected" means every box is unticked.
  2. Check the right microphone is ticked. Open Change or add microphones. A webcam, a monitor or a headset can each have its own microphone, and the one ticked may not be the one you speak into. Tick the right one. The recorder remembers your choice in this browser.
  3. Watch the level bars while recording. Start a short test with Start recording. Each ticked microphone in the list has a bar that moves with its sound. If yours stays still while you talk, check the microphone's own mute switch and your computer's sound settings.
  4. Check Call audio before a call. The tile should say "on" followed by the tab's name. If it says "not captured", press Pick the call tab…. If it says "that tab had no audio", you shared a window or the whole screen, or left the tab-audio box unticked. Pick the call's tab from the tab list and tick Share tab audio.
  5. Check how you picked the screen. If you want the sound of a video or web page, choose A browser tab and tick the tab-audio option in Chrome's window. When you share a window, Chrome does not hand over its sound, and on a Mac a whole-screen share has none either. Sound from other programs on your computer cannot be recorded this way, so play it in a Chrome tab if you can.
  6. Stop the test and play it back. Press Stop and finish and listen in the player before you record the real thing.

Leave the call tab or video tab open for the whole recording. If it closes, Chrome stops sharing its sound.

Messages that explain a gap

  • "Meeting audio sharing stopped." The call tab's sharing ended during the recording, so the other people are silent from that point. Picking the tab again does not add it to a recording already running. Stop, pick it again and start a new recording.
  • A microphone's name followed by "dropped out". The microphone disconnected, often a USB cable or a Bluetooth link. Its sound ends at that point. Reconnect it and start a new recording if you need it.
  • "Bluetooth microphone selected". This is a warning, not a fault. On a Mac, using a Bluetooth headset as a microphone switches it to a low-quality mode, so your voice and anything you hear through it sound like an old phone line. Use the headset to listen and a wired or USB microphone to speak.

When the sound is there but wrong

  • Echo, or the call's voices twice. Wear headphones. If you ticked Record the microphone untouched under Options, the echo correction is off, so untick it for calls. If you filmed the call's tab with its tab audio and also picked it in Call audio, the voices go in twice. Tick tab audio in one place only.
  • Your voice is very quiet or pumps up and down. The usual processing includes volume correction. For a studio microphone, Record the microphone untouched gives you the plain signal instead.
  • A converted GIF is silent. That is expected. GIF files cannot hold sound. Choose MP4, MOV or WebM for video with sound.
  • Another app will not play a source file. The files in Separate sources are WebM, which some players do not open. Use the MP4 beside that folder, or open the WebM files in your audio editor.

For a sound-only recording, switch off Record my webcam and do not pick a screen. The recorder then saves an M4A audio file, which makes it easy to check your microphone on its own.

Related guides