Guides

Record a podcast with every voice on its own track

When each voice is recorded as its own file, you can make a quiet guest louder, cut a cough from one person without touching the others, and fix a bad microphone without ruining the episode. This guide shows you how to get that from Cheap Recorder with one tick, whether your guests sit next to you or join from a Google Meet or Teams call.

Before you start

  • Google Chrome on a Mac, Windows or Linux computer.
  • One microphone per person in the room, all plugged into the same computer. Wired or USB microphones work best. Avoid Bluetooth headsets as microphones, because they drop to a low-quality mode when used that way.
  • Headphones for everyone, so no microphone picks up the sound from a speaker.
  • For remote guests, a Google Meet or Microsoft Teams call open in a Chrome tab.
  • A folder with plenty of free space. Separate files take more room than a single MP4.
  • Your guests' agreement to be recorded, and a quick check of the law where you and they are.

What you get

Normally a recording is one MP4 with every sound mixed together. When you tick Also save every source separately under Options, you still get that MP4, and the recorder also saves each source as its own WebM file, in a folder called Separate sources inside the recording's folder:

  • one audio file for each microphone you ticked, named after that microphone, starting with audio_;
  • audio_meeting_far_end.webm for the other side of a call, if you picked one;
  • webcam.webm if your camera was on, and screen_with_mixed_audio.webm, the screen on its own, when a layout puts the screen and camera together;
  • helper files, including manifest.json (a list of what was recorded), markers.md and finalise.sh.

Step by step

  1. Open Cheap Recorder in Chrome and sign in. Under Where to save, press Choose folder…. Each session gets its own folder inside the one you pick, named with the date, the time and the session name.
  2. Open Options and tick Also save every source separately.
  3. If you use studio microphones, also tick Record the microphone untouched. This turns off the echo, noise and volume correction, which is what you want for good microphones in a quiet room. Leave it unticked if you are on laptop microphones or in a noisy room.
  4. In the Microphone tile, open Change or add microphones and tick every microphone you want recorded. Each one shows "wired" or "bluetooth" beside its name. If one is missing, plug it in and press Rescan. Some plans limit how many microphones you can record at once, and the start bar tells you if you tick too many.
  5. For a remote guest, press Pick the call tab… in the Call audio tile. Choose the call's tab in Chrome's window and tick Share tab audio.
  6. For a sound-only podcast, switch off Record my webcam and do not pick a screen. For a video podcast, leave the webcam on or choose Webcam only.
  7. Name the episode in Name this recording and press Start recording. While it runs, a level bar next to each microphone in the list moves with its sound. Check that every bar moves when its person speaks.
  8. Press M or Add marker at each new topic, or when someone fluffs a line. The marker times are saved in markers.md, in the Separate sources folder.
  9. Press Stop and finish. Every file is already in the session folder.

Do a short test first. Record thirty seconds with everyone saying their name, stop, and open the session folder to check there is one audio_ file per person.

Honest limits

  • Remote guests share one track. The call's sound comes from one Chrome tab, so everyone on the far end of the call is in the same file. If you want two remote guests on separate tracks, each has to record themselves.
  • Microphones in one room hear each other. Each file holds what that microphone picked up, so a loud neighbour will be faintly audible on your track. Sit a little apart and speak close to your own microphone.
  • Files are named after the microphones. Microphones with clearly different names are easiest to tell apart in the folder.
  • If a microphone drops out, a message names it and its file stops at that point. The others carry on.

Editing the tracks

The recorder opens the sources one after another when you press start, so the files can begin a fraction of a second apart. Clap once, sharply, just after you start: in your audio editor, line up the clap on every track and they stay together from there. If your editor does not open WebM files, the session folder has a finalise.sh script that turns each microphone's file into a WAV file. It is a bash script and needs the free ffmpeg program installed on your computer.

If Live transcript is on, the page shows the transcript after you stop. On plans that include speaker detection, each line is labelled with the source that was loudest while it was spoken, and you can rename those labels in the Speaker boxes to your guests' real names.

Related guides